Manufacturer Approvals-Hardware

Manufacturer Approvals - Hardware

In general the following certifications apply to the following groups of products:

SCADAPack PLCs/RTUs

Non-Incendive Electrical Equipment for Use in Class I, Division 2 Groups A, B, C and D Hazardous Locations

SCADASense Pressure, Multivariable and RealFLO Transmitters

Explosion proof for use in Class I, Div. 1 Groups B, C and D Hazardous Locations.
Non-Incendive Electrical Equipment for Use in Class I, Division 2 Groups A, B, C and D Hazardous Locations
IECEx to Exd IIC T6 – 4012, 4032, 4102 and 4203 only
ATEX to EEx d IIC T6 – 4012, 4032, 4102 and 4203 only
Single Seal Compliance Certification under ANSI/ISA – 12.27.01 with maximum working pressures up to 21MPa (3000PSI) - 4012, 4032, 4102 and 4203 only

Accuracy includes the effects of Linearity, Hysteresis and Repeatability API21.1 and Industry Canada Approved

SOLARPack

Non-Incendive Electrical Equipment for Use in Class I, Division 2 Groups A, B, C and D Hazardous Locations

Series 5000 Expansion & Communication Modules

Non-Incendive Electrical Equipment for Use in Class I, Division 2 Groups A, B, C and D Hazardous Locations

SCADAPackVision Series

Non-Incendive Electrical Equipment for Use in Class I, Division 2 Groups A, B, C and D Hazardous Locations
Enclosure IP 65 Protection Rating

NOTE: For product specific details on safety, digital emissions, immunity and declaration refer to our current hardware manuals.