Programming Samples

DISCLAIMER

These sample applications are intended to demonstrate one or more programming functions or methods and are presented as programming examples only. Control Microsystems assumes no liability for the use or application of these example programs or any portion thereof.

ClearSCADA

ClearSCADA - Modbus Virtual PLC.zip - Configure ClearSCADA to receive unsolicited Modbus messages
ClearSCADA - CSV Demo.zip - Read Data into Historian from CSV file
ClearSCADA - DLOG Demo.zip - Read data from SCADAPack DLOG
ClearSCADA - DNP BackFilling Demo.zip - Backfill controller data with DNP protocol
ClearSCADA - Blink Animation Demo.zip - Use Blink feature to animate graphic.
ClearSCADA - RealFLO Demo.zip - ClearSCADA/RealFLO Demo Application
ClearSCADA - Rotation Animation Demo.zip - Rotate Symbol using Rotation Animation feature.
ClearSCADA - SCADAPack Modbus Demo.zip - Poll data from SCADAPack controller
ClearSCADA - Templates and Instances Demo.zip - Convert an Object Group to a Group Template and then Group Instances.
ClearSCADA - VB Script Samples.zip - Use Visual Basic scripts to perform tasks
ClearSCADA - Working with UTC Time in RTU

TelePACE Sample Programs

BCDTOINT.LAD - Converting 16-Bit Binary-Coded-Decimals Into 16-Bit Integer Values.
DF1_DIAL.LAD - Transferring data using a dial-up modem and the DF1 protocol.
DF1_MSTR.LAD - Data Transfer Between SCADAPacks Using DF1 Protocol.
DLOG.LAD - Automatically Log Data Once Per Minute Using DLOG.
DSTO5_10.LAD - Daylight Savings Time Real Time Clock Adjust
FLOW.LAD - Calculate Flow Rates and Accumulated Flow Using Pulse Input.
HART.LAD - Polling a HART Transmitter With a 5904 HART Interface Module.
INIM.LAD - Automatically Initialize a 5901 Dial-up Modem.
INTTOBCD.LAD - 16-bit Unsigned Integer-to-Decimal Conversion.
MB_DIAL.LAD - Automatic Dial Out Between Master and Slave Controllers Via Dial-up Modems.
MB_MSTR.LAD - Transfer Data Between Master and Slave SCADAPacks Using a Serial Connection.
MOTOR.LAD - Simple Motor Control Circuit (or Latch / Unlatch a Coil).
MSIP.LAD - Data Transfer Between Master and Slave Controllers Via Modbus IP.
S&F_ADDR.LAD - Configuring Address Translation in 16-Bit SCADAPack Controllers.
S&F_PORT.LAD - Configuring Port Translation in 16-Bit SCADAPacks
SCALE.LAD - Scaling 16-Bit Analog Inputs Into 32-Bit Floating Point Values.
SCANTIME.LAD - Determining the Scan Time of a Ladder Logic Program.
PIDA.LAD - PIDA Function Element in P-, PI-, PID-control and in manual modes

IEC 61131 Sample Programs

EMAIL_FB_SP350.zip - Email FB for SCADAPack 350
DIAL_SFC.PIA - Dial Up Modem Data Transfer Using SFC Language.
DATA_LOG.PIA - Data Log Using FBD Language.
MOTOR.PIA - Motor Control Using FBD Language.
MSTR_FBD.PIA - Data Transfer Between Controllers Using FBD Language
MSTR_LD.PIA - Data Transfer Between Controllers Using LD Language.
MSTR_SFC.PIA - Data Transfer Between Controllers Using SFC Language
SCALING.PIA - Scaling Raw Input to Engineering Units
STRING.PIA - rxstring and txstring ASCII string functions Using FBD Language.
TCPSTAMP.PIA - SCADAPack 32 LAN Port Slave Message Monitoring and Timestamp using FBD Language.
TEMPLATE.PIA - New ISaGRAF Project Template
SCALING2.PIA - Scaling FB with Minimum, Maximum and Running Average

IEC 61131 Templates

IEC61131_IOCONFIG.zip - ISaGRAF IO Configuration Libraries for each SCADAPack controller and Gas Flow Computer

RealFLO

RealFLO Configuration - TelePACE Tagnames
RealFLO EUB Test Cases

SCADAPack Vision Sample Programs

DEMO_10.PZM - Demo sample for Vision
DEMO_50.PZM - Demo sample for Vision50
RF_VISION10.PZM - Vision10/RealFLO demo program
RF_VISION50.PZM - Vision50/RealFLO demo program
STR_10.PZM - STR Screen Triggering Register Sample for Vision
STR_50.PZM - STR Screen Triggering Register Sample for Vision50

Complete Projects

Pumping Station Control System